Synclean HD Industrial Degreaser

Vishes Global is the Authorised Supplier And Exporter of Synclean HD for Pan India

SynClean HD is a Powerful synthetic, high pH Degreaser. SynClean is a patented ingredient that safely replace harsh caustics across a wide range of industries. SynClean - Synthetic degreaser SynClean formulations have earned a triple zero HMIS score, are non-regulated, noncorrosive, non-flammable, and fully biodegradable within 10 days

SynClean HD is unlike any industrial degreaser on the market. Its superior degreasing power comes from a patented ingredient that safely lifts grease from any surface without the use of solvents. As such, it easily removes petroleum-based oils, vegetable and animal fats, along with dirt, protein, soils and more.

Other degreasers with the power of SynClean are solvent or butyl based, and work by emulsifying the grease from the top of the stain down to the surface where it lies. SynClean encapsulates each hydrocarbon molecule, lifting it from the surface. This means SynClean does not break down the hydrocarbons to where they absorb water, take on weight and sink to the bottom of a grease trap or containment unit. The grease pulled away by SynClean remains in its original form.

SynClean also contains detergent, wetting and sequestering agents, penetrants, rust and corrosion inhibitors making it a true all-in-one cleaner for any use. And a little goes a long way. At a 5:1 dilution SynClean easily removes caked-on hydraulic fluid. At 10:1 SynClean easily cleans a dirty fry hood or removes caked on milk residue. Use at 30:1 for carpets, vehicles or floors. Even at 100:1 SynClean will clean filthy windows and leave behind a streak free finish.

SynClean is so safe it is recommended by truck giants Volvo and Mack to safely clean big rigs. The HD stands for high detergency which will provide ample foam. SynClean LF (low foaming) is for applications where foam is not desired. SynClean works equally with cold or hot water and is safe for use in rotary, steam cleaning machines and car parts washers. SynClean N (neutral) gives SynClean power with a neutral pH. And because SynClean comes with a triple-zero HMIS score, you can store and use the product without special considerations. NSF certified A1, A4, A5, A8, C1 and K1. SynClean HD has been recognized for safer chemistry by the EPA's Design for Environment program and is certified as a direct release product.

Directions for Use :

• Simply spray, sponge, brush or mop SynClean HD on the surface to be cleaned, agitate and rinse well with water as required.

• SynClean HD is suitable to use in high pressure washing systems for trucks, buses, trains, and mining equipment

• Ideal and safe parts washer degrease

Technical Data :

• NITRATE LEVEL : 0% - None

• SHIPPER REGULATIONS : None

• FORM: Liquid FLASH POINT : None

• ODOR : Mild Soapy Odour

• BOILING POINT : 212° F

• COLD STABILITY : -18° F

• SOLUBILITY IN WATER : 100%

• DETERGENCY : Strong

• BIODEGRADABLE : Yes/100%

• TOXICITY : Non-Toxic

• VOLATILE BY VOLUME : N/A

• WETTING ABILITY : Excellent

• CARCINOGENS : None

• STORAGE STABILITY : 3 Years+

• VISCOSITY : Thin

Flammability :

• Will not burn

• Flash point above 200 degrees F

• Flash point between 100-200 degrees F

• Flash point between 73-100 degrees F

• May ignite spontaneously when exposed to air

Reactivity :

• Stable material

• Stable at normal temperatures and pressures

• Violent chemical changes at higher temps, may react violently with water

• Will detonate with initiating action, will react violently with water

• May detonate spontaneously at normal temperatures and pressures

Packaging Options :

• SynClean is available in 5L, 20L or 200L drums.

• For high volume applications, a 1,000L Industrial Bulk Container is also available upon request.

Metal Studies :

• Dept. of Transportation (D.O.T.) Test Protocols as per Section 173.154

• Exceptions for Class 8 (corrosive materials): The material being tested must be proven to be non- destructive or not to cause irreversible alterations in human skin tissue. Testing was conducted on an albino rabbit.

• Conclusion: SynClean HD proven to be NON-DESTRUCTIVE on human skin tissue.

• Metal Test Limits:

• D.O.T. classifies a material to be CORROSIVE if it has a corrosion rate that exceeds 6.25 mmpy on SAE

• C1020 carbon steel or 7075-Y 6 Aluminium.

• Results of SynClean HD: SAE 1020 carbon steel = 0.00 mmpy 7075-Y 6 aluminum = 0.00 mmpy

• Conclusion: SynClean HD is NON-CORROSIVE

Toxicity Studies :

• Toxicity Limits: Test Procedure OECD 202, 48 hr. LC 50 and LD 50 (rat oral) found to be NON-TOXIC

• Mutagenicity Limits: OECD Guidelines Sec. 471 Chemicals SynClean was found NOT TO BE MUTAGENIC

Dermal Irritation & Corrosion Test :

• A modified Draize method was used as described in OECD Guidelines for the Testing of Chemicals Sec. 404 and complies with the requirements of OECD Principles of GLP, Annex revised as of July 1992.

• SynClean received a Primary Irritation Score of .40 +/-0.1 and is classified as a "Non-Skin Irritant"

Biodegradation & Aquatic Safety :

Test Procedure : Hach Reactor Digestion method for Waste Water and Sea Water. Hach Reactor Digestion Method is a semi-micro adaptation of the Standard Methods.

• Test Results Conclude SynClean was found to be 100% Biodegradable

• COD = Low Detectable Limits

• BOD = No Detectable Limits

• Additional Studies & Results: When tested, SynClean showed no potential for the generation of Carbon Dioxide under NIOSH 7903, OSHA & ACGIH testing protocols governing workplace environments